Specifications
Key Specs
Drive TypeBelt driveOperation TypeAutomaticCartridge Type IncludedNot includedAudio Only Outputs1 x 3.5mm audioNetwork Connector(s)No network connectorsWireless ConnectivityBluetooth
General
Product NameStereo TurntableBrandAudio-TechnicaModel NumberAT-LP60X-GMColorBlack/Gunmetal
Audio
Drive TypeBelt driveOperation TypeAutomaticTurntable TypeComponentPlayable Record Speeds33 1/3, 45Turntable Motor TypeACWow and Flutter0.25 percentSpeed Variation33.3rpm, 45rpm
Cartridge & Tonearm
Cartridge Type IncludedNot includedStylus ShapeDiamondTonearm ShapeStraight arm
Outputs
Audio Only Outputs1 x 3.5mm audioSpeaker Connection TypeRCA
Inputs
Network Connector(s)No network connectors
Connectivity
Wireless ConnectivityBluetooth
Dimensions
Product Height3.8 inchesProduct Width14.2 inchesProduct Depth14.7 inchesProduct Weight5.7 pounds
Material
Platter MaterialAluminum diecastPlatter Mat MaterialAluminum diecast
Included
Cable(s) IncludedRCASpeaker(s) IncludedfalsePlatter Mat IncludedtrueDust Cover Includedtrue
Other
UPC4961310147167
Questions & Answers (235)
- A: If you already own passive type speakers, you will need to install a stereo receiver or amplifier between the turntable and the speakers. Receivers and Amplifier have a POWER amplifier inside to amplify connected sources, such as a turntable, up to a level that can adequately drive the speakers. Another option would be to use POWERED (aka active) type speakers. Powered speakers have their own power amplifier built into them so there is no need for a separate stereo receiver or amplifier. Due to the inclusion of a phono preamplifier in the turntable, the turntable may be connected to devices that either do or do not have a dedicated PHONO input for a turntable. A phono preamplifier raises the phono level signal from a turntable (which is very weak) to a stronger line level signal (such as that which you get from a CD Player) so it can drive the preamplifier section of a receiver, amplifier or powered speaker, then the preamplifier drives the power amplifier. Its all about gain staging so that, in the end, you have a good signal to noise ratio. A phono preamplifier also applies the RIAA equalization curve which is required for the playback of records.
Q: Are there built in speakers or do you have to purchase speakers separately? (4 answers)
A: No speakers, just an RCA pre-out so you can connect to an audio system or soundbarQ: do you need a preamp in order to increase the voltage to feed my onkyo av receiver? (5 answers)
A: No. This turntable has both phono and line output.Q: Can you connect this turn table to a apple computer to down load content (4 answers)
A: Hello Ty: You can't connect this turntable to a computer but Audio Technica does have a model that is both bluetooth ready and capable of linking to any computer with a usb connection.Q: Is this turntable compatible with wireless speakers? (3 answers)
A: No...This model must use wired speakers. Audio Technica sells another model that does offer bluetooth connectivity.Q: Is the stylus pressure adjustable and does it have an anti-skate adjustment. (4 answers)
A: There is no stylus pressure or anti-skate adjustment function on this model. Those functions are all automatically controlled by this model. If you want those functions, check Audio Technica's other turntable models.Q: Do you need speakers for this? (3 answers)
A: yes. I have a soundbar and subwoofer.